Multipure Aquaperform Drinking Water Filter – Below Sink with Capacity Monitor

5% Direct-to-Manufacturer Discount – Click Here for Details

Fresh, Clean Drinking Water for Pennies per Gallon!

Description

The Multipure Aquaperform Below Sink with Capacity Monitor model is one of the most technologically advanced water treatment devices available, providing the BEST in performance – reduces all of the contaminants that the other Multipure Drinking Water Systems do, PLUS ARSENIC!

The Multipure Aquaversa Below Sink with Capacity Monitor model uses its own specially-designed drinking water faucet installed above counter, and has a capacity monitor installed below counter that alerts you when it’s time to replace the carbon filter cartridge. The monitor sounds an audible alert when the filter cartridge should be changed and the meter displays the number of gallons remaining before filter capacity is fully exhausted, substantially extending the useful life of the replacement cartridge. The versatile filtration unit housing can be mounted on the cabinet wall with the bracket provided, or set on the cabinet floor using a plastic base. It also may be connected to an icemaker using an icemaker tee fitting, and the system later may be converted to a countertop unit with the purchase of a conversion kit. The plastic base, icemaker tee, and countertop conversion kit are optional parts and are not included with the product.

The Aquaperform uses Multipure’s unique solid carbon block filter technology, which is considered to be the most effective method for reducing a wide range of contaminants of health concern that may be present in your local water. The carbon is compacted into a dense structure, causing every molecule of water to be forced through microscopic pores of carbon, effectively reducing pollutants. The solid carbon block water filter is a replaceable cartridge designed so that it may be easily changed. The solid carbon block water filter does not waste water, there is no electricity required, it does not remove essential trace minerals that are beneficial to good health, it does not add salt or silver to the water, and it provides fresh, delicious, healthy drinking water. You can trust that the Aquaperform will deliver clean water as promised because the Aquaperform is tested and certified by NSF International against stringent performance standards. The Aquaperform reduces all of the contaminants that the Multipure Aquaversa drinking water systems do as well as reducing Arsenic V. 

This filter system previously was identified as Multipure model MP880EL.

Faucet Finishes Available – Make Your Faucet Selection At Checkout

A Chrome finish Designer Faucet is available at no additional charge. For an additional charge, you may substitute one of the eight colored Designer Faucet finishes shown below. When you add this Multipure Drinking Water System to your shopping cart, you will be prompted to accept the standard Chrome faucet finish at no additional charge, or choose one of the following faucet finishes for a small additional charge. Click on any faucet image below for a better view.

Brushed Nickel Faucet Brushed Stainless Steel Faucet Oil Rubbed Bronze Faucet Black Faucet
Brushed Nickel Stainless Steel Oil Rubbed Bronze Black
White Faucet Almond Faucet Polished Brass Faucet  
White Almond Polished Brass  

Features

Key Features of the Multipure Aquaversa Below Sink with Capacity Monitor model include:

  • Designed for below counter installation
  • Includes capacity monitor to measure actual water consumption and accurately time filter replacement for optimal filter change intervals
  • Economical to own – Operating cost is 16¢ per gallon
  • Long filter life – Capacity is about 1 year of typical use
  • Employs submicron (0.5 micron) solid carbon block technology with easily replaceable filter cartridge (model CB11As)
  • Utilizes mechanical filtration, electrokinetic adsorption and chemical/physical adsorption processes for comprehensive contaminant reduction
  • Tested and certified under NSF/ANSI Standards 42 (Aesthetic Effects), 53 (Health Effects) and 401 (Emerging Contaminants) to reduce a wide range of contaminants of health concern (see product Performance Data Sheet for specific contaminant reduction information)
  • Proven effective to reduce Arsenic contamination to below EPA standards
  • NSF-certified to reduce PFOA/PFOS and Microcystin
  • Comes with one filter cartridge
  • Includes necessary accessories, easy connect fittings, and installation hardware
  • Extensive owner's manual with detailed instruction for installation and troubleshooting
  • 90-Day Money-Back Guarantee and Lifetime Warranty on housing

  • Reviews


    What's In the Box


    Documentation

    Aquaperform User Guide
    The User Guide provides detailed instructions for installing and maintaining your new water filtration system.

    Performance Data Sheet
    NSF product certification data with contaminant reduction test results.

    Aquaperform Specifications Sheet
    Detailed specifications for the Aquaperform Below Sink with Capacity Monitor model

    Aquaperform Installation Guide
    Step-by-step guidance of the installation process


    Specifications

    Model Aquaperform Below Sink with Capacity Monitor
    MSRP $800.00
    Replacement Filter Cartridge Model CB11As
    Estimated Annual Maintenance Cost $150.00
    Recommended Service Cycle Replace filter cartridge annually
    Description Capacity-metered below sink carbon block water filter with Arsenic reduction
    Installation Location Mounts under counter
    Filtration Technology Activated solid carbon block
    Particle Retention Size Submicron (0.5 micron nominal)
    Housing Composition Stainless steel
    Faucet Composition Chrome plated lead-free
    Rubber Items Neoprene
    Inlet 1/4" Pipe
    Outlet 1/4" Pipe
    Rated Filter Capacity 960 Gallons
    Compliance Certification NSF/ANSI Standards 42, 53 and 401
    Weight (basic unit) 8.0 lbs.
    Height 11.0 in.
    Body Diameter 5.75 in.
    Approximate Flow Rate 1.0 gpm @ 60 psi
    Maximum Operating Pressure 100 psi — 7.0 kg/cm2
    Minimum Operating Pressure 30 psi — 2.1 kg/cm2
    Maximum Operating Temperature 100° F / 38° C - cold water use only
    Minimum Operating Temperature 32° F / 0° C - cold water use only
    Manufacturer Warranty Lifetime on housing; 1 year on accessories


    Click to view a PDF version of these specifications


    Read Frequently Asked Questions


    Image Gallery

    Below Sink Installation Kit (Included)
    Aquaperform Installed
    Standard Chrome Faucet
    Brushed Nickel Faucet (Optional)
    Chrome Faucet in Use
    Aquaperform Installation Hardware
    Aquaperform Capacity Monitor
    Aquaperform Housing & Cartridge

    View Water2Drink's Product Comparison Chart

    Download the Product Comparison Chart Today (PDF Format)

    Made Here

    We gladly accept the following credit cards:
    Visa, Mastercard, Discover, American Express

     


    Buy Now

    Multipure Aquaperform Drinking Water Filter – Below Sink with Capacity Monitor

    Price: $800.00
    Shipping Fee: FREE Ground Shipping within Continental US.

    See shipping charges for all other locations and products.
    Stock Status: In Stock
    Buy Now


    Multipure Independent Builder Logo

    Water2Drink.com is
    an Independent Builder for
    Multipure Products

    Founded in 1970, Multipure is an industry leader in the manufacture and distribution of drinking water systems and compressed solid carbon block filters. Headquartered in Las Vegas, Nevada, Multipure employs over 300 people, and is committed to being an eco-friendly company that provides the people of the world with the best quality drinking water at an affordable price. Multipure is a member of the Water Quality Association, the Las Vegas Chamber of Commerce, and the Better Business Bureau.

    Experience You Can Trust.

    Water2Drink is the 2014 Multipure Sales Team of the Year

    Water2Drink.com has the knowledge and depth of experience to guide our customers in making optimal water filtration system choices. Each member of our team takes the time to first listen to our customers before making any recommendations, making sure that we understand what unique drinking water problems our customers may be facing. We only recommend products and solutions that have a proven track record and best suit the needs of our customers. Year after year, Water2Drink.com has been recognized by Multipure as one of their leading Builders, serving customers as a trusted source for all things Multipure.

    Why Multipure & Water2Drink?

    1Superior Performance

    Multipure Drinking Water Systems reduce a greater number of contaminants of health concern when compared to competitive products. Multipure leads the industry in reducing contaminants, constantly innovating and improving filter performance.

    2NSF Tested & Certified

    Multipure Drinking Water Systems are performance tested and certified by NSF International. This independent certification guarantees that the products will live up to your expectations and deliver the protection your family wants and needs.

    3Lifetime Warranty

    Multipure stands behind its products with the best warranty in the industry and a satisfaction guarantee. The filter housings come with a Lifetime Warranty – your lifetime – and a 90-day money-back satisfaction guarantee.

    4Expert Customer Service

    Water2Drink provides expert customer service to assist you in evaluating your personal drinking water concerns, and help you determine the Multipure Drinking Water System and accessories that are best suited to satisfy your individual needs.