Multi-Pure® Drinking Water Systems Performance
Data:
This page is your one-stop shop for performance
data information about Multi-Pure®'s wide range of water filtration
systems. We've made these data sheets available in Adobe's
PDF file format. If you don't have the FREE PDF Reader software,
click on the link below to obtain it.
FOOTNOTES (MP
750, 1200 Series):
1. Multi-Pure® Drinking Water Systems
have been certified, as indicated, by NSF International
for compliance to NSF/ANSI Standard Nos. 42 & 53.
2. The Multi-Pure® Drinking Water Systems have been certified
by the State of California Department of Health Services
for the reduction of specific contaminants listed herein.
3. Chloroform was used as a surrogate
for claims of reduction of VOCs. Multi-Pure® Systems
tested at >99.8% actual reduction
of Chloroform. Percent reduction shown herein reflects
the allowable claims for VOCs as per tables in the Standard.
4. Do not use with water that is microbiologically unsafe
or of unknown quality without adequate disinfection before
or after the system. Systems certified for cyst reduction
may be used on disinfected water that may contain filterable
cysts.
5. Filter life will vary in proportion
to the amount of water used and the level of impurities
in the water being
processed. For optimum performance, it is essential that
the filter be replaced on a regularly scheduled basis
as follows: (a) annually; (b) when the unit’s rated
capacity has been reached; (c) the flow rate diminishes;
(d) the filter
becomes saturated with bad tastes and odors.
6. Model No. MP1200EL includes a capacity monitor that automatically
flashes a yellow light when it is time to replace your filter.
7. Multi-Pure® Drinking Water System
Housings are warranted
for the lifetime of the system (please
note that you must change the filter at least once a year);
all exterior hoses and attachments to the System are warranted
for one
year.
Please
see
the Owner’s Manual for complete product
guarantee and warranty information.
8. Please see the Owner’s Manual
for installation instructions and operating procedures.
9. In compliance with New York law, it is recommended that
before purchasing a water treatment system, NY residents
have their water supply tested to determine their actual
water treatment needs. Please compare the capabilities of
the Multi-Pure® unit with your actual water treatment needs.
10. Check for compliance with state and local laws and regulations.
11. While testing was performed under standard laboratory
conditions, actual performance may vary.
12. The list of substances which the treatment device reduces
does not necessarily mean that these substances are present
in your tap water.
FOOTNOTES (MP 880 Series):
1. Multi-Pure® Drinking Water Systems
have been certified, as indicated, by NSF International
for compliance to ANSI/NSF
Standard Nos. 42 & 53.
2. The Multi-Pure® Drinking Water Systems have been certified
by the State of California Department of Health Services
for the reduction of specific contaminants listed herein.
3. Chloroform was used as a surrogate
for claims of reduction of VOCs. Multi-Pure® Systems
tested at >99.8% actual reduction
of Chloroform. Percent reduction shown herein reflects
the allowable claims for VOCs as per tables in the Standard.
4. The systems have been tested for the treatment of water
containing pentavalent arsenic. Please see Arsenic Facts
section on page 7.
5. Do not use with water that is microbiologically unsafe
or of unknown quality without adequate disinfection before
or after the system. Systems certified for cyst reduction
may be used on disinfected water that may contain filterable
cysts.
6. Filter life will vary in proportion
to the amount of water used and the level of impurities
in the water being
processed. For optimum performance, it is essential that
the filter be replaced on a regularly scheduled basis
as follows: (a) annually; (b) when the unit’s rated
capacity has been reached; (c) the flow rate diminishes;
(d) the filter
becomes saturated with bad tastes and odors.
7. Model No. MP 880 EL includes a capacity
monitor that automatically flashes a yellow light when
it is time to replace your filter.
8. Multi-Pure® Drinking Water System
Housings are warranted
for the lifetime of the system (please note that you
must change the filter at least once a year); all exterior
hoses and attachments to the System are warranted for one
year. Please see the Owner’s Manual for complete product
guarantee and warranty information.
9. Please see the Owner’s Manual
for installation instructions and operating procedures.
10. In compliance with New York law, it is recommended that
before purchasing a water treatment system, NY residents
have their water supply tested to determine their actual
water treatment needs. Please compare the capabilities of
the Multi-Pure® unit with your actual water treatment needs.
11. Check for compliance with state and local laws and regulations.
12. While testing was performed under standard laboratory
conditions, actual performance may vary.
13. The list of substances which the treatment device reduces
does not necessarily mean that these substances are present
in your tap water.
|
